单项选择题

A customer has two Ethernet Switch Modules installed in an IBM BladeCenter Enterprise chassis. The modules were configured identically. The Ethernet module in bay one was inadvertenly reset to factory defaults. Which solution returns the module to the customer-specific configuration?（）

A.Back up the configuration from Ethernet module in bay 2 and restore it to the module in Bay 1 using the switch CLI or Web interface
B.Swap the modules, which will automatically resynch the settings stored in the Advanced Management Module
C.Back up the configuration of the Ethernet module in bay one and restore it to the Ethernet module in bay two using the AMM
D.Restore the configuration from NVRAM using the Switch Module Web interface

<上一题目录下一题>

热门试题

单项选择题AcustomerhasaBladeCenterHchassiswithasingleAMM.TheAMMisdefective.WhichofthefollowingisthemethodtobackuptheexistingAMMsothenewAMMautomaticlallypicksuptheconfiguration?（）

A.Back up the AMM configuration to a file
B.Back up the AMM configuration to the chassis
C.Back up the AMM using IBM Systems Director
D.Back up the AMM using Tivoli Storage Manager

单项选择题AretailcustomerinstallsaBladeCenterintoanexisting10 100Ethernetnetwork.Duetocostconsiderations,thecustomerusesCopperPass-thruModules.Afterinstallingthissolution,thecustomerfindsthattheyhavenonetworkconnectivity.Whichofthefollowingatiscausingtheproblem?（）

A.Copper Pass-thru Modules only support 1000Mb line speeds.
B.Spanning Tree has been enabled on the Copper Pass-thru Module.
C.The customer does not have the latest firmware loaded on the Copper Pass-thru Module.
D.The customer is using LS21 Blades

单项选择题AmedicalcustomerhasaninstalledHS21bladewithnolocaldisk.TheyareattemptingtosetupbootfromSANusingaWindows2003CD.Whichsequenceiscorrectforthisprocedure?（）

A.Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
B.Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
C.Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
D.Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD

单项选择题WhichofthefollowingstepsdoesacustomerusetoupgradethefirmwareontheAMMtothelatestlevel?（）

A.Open a Web browser and log on to the IMM; in the navigation frame, click IMM Firmware Update under IMM Control; click Browse; select the .exe file; click the Upgrade/Update button
B.TFTP to the AMM; from the Main Menu, select Update; browse to the downloaded .exe file
C.Telnet to AMM; from the Main Menu, select Update; browse to the downloaded .pkt file
D.Open a Web browser and log on to the AMM; in the navigation frame, click AMM Firmware Update under AMM Control; click Browse; select the .pkt file; click the Upgrade/Update button

单项选择题InwhichphaseshouldaTDAbeperformed?（）

A.Server deployment
B.Installation and server configuration
C.Problem determination/resolution
D.Needs analysis and design