单项选择题

A retail customer installs a BladeCenter into an existing 10/100 Ethernet network. Due to cost considerations, the customer uses Copper Pass-thru Modules. After installing this solution, the customer finds that they have no network connectivity. Which of the following at is causing the problem?（）

A.Copper Pass-thru Modules only support 1000Mb line speeds.
B.Spanning Tree has been enabled on the Copper Pass-thru Module.
C.The customer does not have the latest firmware loaded on the Copper Pass-thru Module.
D.The customer is using LS21 Blades

<上一题目录下一题>

热门试题

单项选择题AmedicalcustomerhasaninstalledHS21bladewithnolocaldisk.TheyareattemptingtosetupbootfromSANusingaWindows2003CD.Whichsequenceiscorrectforthisprocedure?（）

A.Install Windows from the CD using the QLogic driver provided on the CD, configure the LUN and zone for the target server, and then configure the blade UEFI to boot from SAN.
B.Configure the LUN and zone for the target server, install Windows from the CD and press F6 when prompted to supply the driver, and then configure the QLogic adapter BIOS to boot from SAN.
C.Configure the LUN and zone for the target server, configure the QLogic adapter BIOS to boot from SAN, install Windows from the CD, and then press F6 when prompted to supply the driver.
D.Configure the blade UEFI to boot from SAN, configure the LUN and zone for the target server, and then install Windows from the CD using the QLogic driver provided on the CD

单项选择题WhichofthefollowingstepsdoesacustomerusetoupgradethefirmwareontheAMMtothelatestlevel?（）

A.Open a Web browser and log on to the IMM; in the navigation frame, click IMM Firmware Update under IMM Control; click Browse; select the .exe file; click the Upgrade/Update button
B.TFTP to the AMM; from the Main Menu, select Update; browse to the downloaded .exe file
C.Telnet to AMM; from the Main Menu, select Update; browse to the downloaded .pkt file
D.Open a Web browser and log on to the AMM; in the navigation frame, click AMM Firmware Update under AMM Control; click Browse; select the .pkt file; click the Upgrade/Update button

单项选择题InwhichphaseshouldaTDAbeperformed?（）

A.Server deployment
B.Installation and server configuration
C.Problem determination/resolution
D.Needs analysis and design

单项选择题AnIBMSystemxTechnicalExperthasaprospectivecustomerwhoisveryexcitedaboutX5andtheyareworkingonconfigurations.Duringtheprocessthecustomerhaschangedthedesignnumeroustimesandhassignificantlyincreasedthescope.TheyrecentlyselectedaBusinessPartnerwhohasbeeninvolvedinthelastfewdesignchanges.Whatstepsshouldbetakentomakesurethecustomerissatisfiedwiththesolution?（）

A.Turn over current design to Techline to create configurations
B.Perform knowledge transfer of design requirements to Business Partner then disengage
C.Work with business partner to engage Techline to assist with configurations and request Technical and Delivery Assessment (TDA)
D.Work with business partner to engage Techline to create configurations

单项选择题AbankingcustomerhastwoEthernetSwitchModulesinstalledinanIBMBCEchassis.Themoduleswereconfiguredidentically.TheEthernetmoduleinbay1wasaccidentallyresettofactorydefaults.Whichsolutionreturnsthemoduletothecustomer-specificconfiguration?（）

A.Restore the configuration from NVRAM using the Switch Module Web interface
B.Back up the configuration of the Ethernet module in bay 1 and restore it to the Ethernet module in bay 2 using the AMM
C.Swap the modules, which will automatically resynch the settings stored in the Advanced Management Module
D.Back up the configuration from Ethernet module in bay 2 and restore it to the module in Bay 1 using the switch CLI or Web interface