A.刚性 B.柔性 C.弹性 D.黏性
多项选择题以下用电设备为一级负荷的是()。
A.牵引供电系统 B.应急照明 C.通信、信号设备 D.自动售检票设备
多项选择题轨道主要是由()组成的。
A.轨枕 B.道床 C.联结零件 D.防爬设备及道岔
多项选择题站台门主要由哪些组成部分()。
A.滑动门 B.固定门 C.应急门 D.端门
单项选择题降压变电所是用来将33kV电压降为()供动力、照明配电系统使用。
A.380/220V B.360/220V C.380/110V
单项选择题对双线区间,当两线间无建(构)筑物时,两条线设备限界之间的安全间隙不应少于()。
A.100mm B.100cm C.100m D.130mm
单项选择题接触轨的特点是()。
A.导电性能好 B.重量大 C.耐磨性差 D.经济性较差
单项选择题列车在道岔区段运行时,道岔处于()。
A.自由转动状态 B.全线锁闭状态 C.区段锁闭状态 D.永久锁闭状态
单项选择题停车场内采用7#道岔,其侧向通过限速为()公里 小时。
A.10 B.15 C.20 D.25
单项选择题城市轨道交通电力监控系统简称()。
A.SCTDA B.SCADA C.SACDA D.SDACA
单项选择题在直流牵引供电系统中,除了出于安全考虑外,变电所的接地系统和回流回路之间()。
A.不应直接连接 B.应合并汇流接地 C.应使用粗线连接 D.应使用带保险的装置连接
单项选择题轨道交通正线站线最大坡度应不大于()。
A.2‰ B.3‰ C.5‰ D.10‰
单项选择题城市轨道交通限界主要有:车辆限界、建筑接近限界以及()。
A.信号限界 B.设备限界 C.接触网限界 D.人员接近
单项选择题城市轨道交通线路上常用的钢轨类型为()两种。
A.75kg/m和60kg/m B.60kg/m和50kg/m C.50kg/m和43kg/m D.60kg/m和43kg/m
单项选择题以下不属于接触网部件的是()。
A.接触线 B.承力索 C.腕臂 D.断路器
单项选择题与列车受电弓直接接触的是()。
A.承力索 B.馈线 C.接触线 D.接地线