单项选择题

A client will be creating partitions on multiple systems with identical configurations. What is the recommended method for cloning the master partition?（）

A.Create a mksysb backup of the original and restore it to the new partitions
B.Use NIM to load the additional partitions from an image of the original partition
C.Create alt_disk_install clones of the original partition and assign the target disks to the new partitions
D.Use the split mirror function to split off additional copies of the original partition and assign them to the other partitions

<上一题目录下一题>

热门试题

单项选择题Companycom is purchasing a 64-way p5 595. They have determined the location for the server is in a datacenter which does not have a raised floor. Which of the following would best meet the server requirements?（）

A.The server must be installed into a location with a raised floor for optimum system cooling and cable management.
B.The server should be purchased as a p5 590 and then upgraded to a p5 595. This will eliminate the need for a raised floor environment.
C.The server should be purchased as 32-way p5 595 and then upgraded to a 64-way. This will eliminate the need for a raised floor environment.
D.The server can be installed into a location without a raised floor if an RPQ is obtained. It is a strong IBM recommendation for a raised floor, not a requirement.

单项选择题Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）

A.Enable DHCP server on the HMC
B.Configure host name and IP address on DNS server
C.Manually set the IP address of the service processor
D.Connect a RS-232 cable from the HMC to the service processor

单项选择题Companycom has several AS 400 servers in their IT infrastructure running V5R2 that they wish to consolidate. The customer wants to simplify their environment and install i5 OS on a p5 590 with 16 1.65GHz processors and 20 i5 OS partitions. The customer plans to use the Advanced Power Virtualization to share their storage, processors, and memory. What considerations and limitations should be reviewed with the customer before the purchase?（）

A.Resources cannot be shared with an i5 partition when it is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. V5R3 OS or later is required. There is a maximum of two partitions in a 590.
B.Resources cannot be shared between partitions when i5/OS is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. i5/OS can be at V5R2 or a V5R3. Currently only one i5 partition is allowed.
C.V5R3 is required for the i5 partitions. Virtual IO Server is not supported for the i5/OS partitions to share storage. Up to 10 i5 partitions per processor are allowed (a maximum of two processors for up to 20 partitions).
D.Processor and memory resources can be shared between AIX 5L, Linux and i5/os partitions. i5/OS needs to be at V5R3, and Virtual IO Server is not supported for the i5/OS partition to share storage. On a 1.65 GHz POWER5 p5 590 there is a maximum of one partition.

单项选择题Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary. What is necessary for communication between the LPARs and the HMC?（）

A.An administrative VLAN with port 1808
B.Port 657 which must remain open to TCP/IP and UDP traffic
C.Network addresses are provided by DHCP services on the network
D.DHCP on the HMC is required to be on to communicate between LPAR and HMC

单项选择题Alargeenterprisecustomerneedsastandardizedwaytobackupuserdatafrommultiplesystemstotape.Whatsolutionwillmeetthisneed?（）

A.backup command
B.Tivoli Storage Manager
C.Tivoli Disaster Recovery Manager
D.Store mksysb images on a NIM server