A.the highest B.above 3/4 C.1/2 -3/4 D.the lowest
单项选择题() is not installed on the main switchboar.
A.Ammeter and changeover switch B.Power factor meter C.Synchroscope D.Reverse sequence relay
单项选择题One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
A.seal water supply be cut off B.make up water supply be cut off C.oil outlet valve closed or not open sufficiently D.the flow rate of oily water is too much
单项选择题When does auxiliary burner of incinerator put into operation? () Ⅰ. start incinerator when it is cold Ⅱ. the sludge for dealing with is little Ⅲ. the sludge for dealing with is large Ⅳ. the water and impurity in sludge are too much Ⅴ. the temperature in incinerator is low Ⅵ. dealing with little solid rubbish
A.Ⅰ+Ⅱ+Ⅲ+Ⅴ B.Ⅰ+Ⅱ+Ⅲ+Ⅳ C.Ⅰ+Ⅳ+Ⅴ+Ⅵ D.Ⅰ+Ⅱ+Ⅲ+Ⅵ
单项选择题If separating effect is not good, which measure should be taken ()
A.working at intervals and properly heating B.warming up to 70℃, increase water supply flow C.improving impulse of water supply D.reducing water supply flow
单项选择题Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
A.MARPOL Annex Ⅲ B.MARPOL Annex Ⅵ C.MARPOL Annex Ⅴ D.MARPOL Annex Ⅳ