The output of the command displays the following. The output of the command displays the following. FSUID PID PPID C PRI NI ADDR SZ TTY TIME CMD 120005 A0 40931 392412 67 20 1b23 201 pts/0 0.00 scriptA 100023 A 0 34596 23441 4 69 20 a328 341 pts/00.00 scriptB.
What must be done to ensure scriptB receives dispatching priority over scriptA?（）

单项选择题An administrator notices that some of their systems are reporting a number in the eferred Level?column on the HMC pdates?panel. WhatAn administrator notices that some of their systems are reporting a number in the ?eferred Level?column on the HMC ?pdates?panel. What is the meaning of the eferred Level?is the meaning of the ?eferred Level?（）

A.The number denotes the firmware level which will be activated when AIX is next rebooted.
B.The number denotes the firmware level which will be activated when all LPARs are next started.
C.The number denotes the firmware level which will be activated when the managed system is next restarted.
D.The number denotes how many days have elapsed since the firmware was installed without the LPARs being reactivated.

单项选择题The IP address of POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address is the status, which shows ailedThe IP address of POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address is the status, which shows ?ailed Authentication? The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC?（）

A.The hscroot user password.
B.The CE password.
C.The HMC password.
D.The ASM admin password.

单项选择题Which procedure should be used to configure the system to prevent all users from using the ‘at’ command?（）

A.Create a /var/adm/cron/at.allow file with no entries
B.Create a /var/adm/cron/at.deny file with '*' as the only entry
C.Create a /var/adm/at/at.deny file with 'ALL' as the only entry
D.Create a /var/adm/at/at.allow file with 'NONE' as the only entry

单项选择题A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）

A.A VIO server requires a dedicated LHEA port.
B.There is a limit of 32 LPARs per virtual LAN.
C.Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.
D.Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.

单项选择题A client has a temporary deployment of a new static application that needs to run for a short period of time and is not going to change. How can this deployment be achieved with a minimum of effort and time?（）

A.Run a system WPAR and deploy the application.
B.Create a new LPAR and deploy the application.
C.Create an application WPAR to deploy the application.
D.Create an LPAR hosted by a VIO server and deploy the application.