多项选择题

Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）

A.It must always be set on all QoS profile types because this sets the type of markings as either CoS or DSCP.
B.It is optional if the Cisco WLC attached switch operates on a trust DSCP model.
C.It must be set if the Cisco WLC attached switch operates on a trust CoS model.
D.It sets the EDCF queue used for the radio-transmitted frames.

<上一题目录下一题>

热门试题

单项选择题WhatisthebandwidthrequirementofanactiveduplexwirelesscallusingG.711codec?（）

A.64 kb/s
B.91.2 kb/s
C.173 kb/s
D.183 kb/s
E.211 kb/s

单项选择题WhatistheminimumconfigurationyoumustdoinordertoenablemulticastsupportontheCiscoWirelessLANControllerv5.2?（）

A.Enable the IGMP snooping capability and define the IGMP timeout period.
B.Set the Ethernet multicast mode to Enabled， enable the IGMP snooping capability， and define the IGMP timeout period.
C.Set the multicast monitor function to Enabled， enable the IGMP snooping capability， and define the mandatory data rate to the minimum value supported.
D.Set the Ethernet multicast mode to Multicast and define the multicast group address.

多项选择题WhichthreeactionsarerequiredtoaccessthenetworkstatisticsonaremoteCiscoUnifiedWireless IPPhone7921Gviaawebbrowser?（）

A.Browse to the phone using the MAC address of the phone.
B.Use HTTPS:// preceding the address of the phone.
C.Change web access to read/write for the MAC address of the phone on Cisco Unified Communications Manager.
D.Enter the username and password of the phone.
E.Ensure that the host is on the same subnet as the remote phone.

多项选择题WhichtwoEAPtypesdoestheCiscoUnifiedWirelessIPPhone7921Gfirmwarecodeversion1.3(x) support?（）

A.EAP-TLS
B.EAP-TTLS
C.EAP-SIM
D.PEAPv1/EAP-GTC
E.LEAP

多项选择题Whendesigningthecoverageareaforhighcallcapacity,whattwoactionsshouldbedonewithdata ratesandchannels?（）

A.Avoid channels with high AP co-channel interference.
B.Use channels with high AP co-channel interference to avoid channel roams.
C.Set the 2.4-GHz data rate of 5.5 Mb/s to required.
D.Use 5-GHz channels when possible.
E.Use 2.4-GHz channels when possible.