When reassembling the bowl of a disk-type centrifuge, the bowl or locking ring is rotated （）.

单项选择题In diesel engines designed with a crosshead, the motion of the piston rod can be described as （）.

A.reciprocating at the piston pin, rotary at the crank pin
B.reciprocating at the crank pin, rotary at the piston pin
C.straight reciprocation
D.straight rotation

单项选择题Immediately after any diesel engine is started, the engineer should check the （）

A.crankcase pressure
B.lube oil pressure
C.saltwater pressure
D.exhaust temperature

单项选择题The rate of heat transfer in a water-tube auxiliary boiler can be increased by （）.

A.operating the boiler at less than normal water level
B.installing fins on the firesides of water-tubes
C.increasing the amount of excess air to the burners
D.treating the boiler water with chemical oxygen scavengers

单项选择题The term “proper metering”, as applied to a diesel fuel injection system, can be best defined as （）.

A.delivering the same quantity of fuel to each cylinder for each power stroke according to engine load
B.maintaining the metering adjustment for a reasonable period under all load conditions
C.timing fuel injection to obtain maximum power and good fuel economy
D.distributing the fuel to all parts of the combustion chamber for proper combustion

单项选择题Connecting rods in a diesel engine are used to connect the （）.

A.engine to the bed
B.rocker arm to the camshaft
C.crankshaft to the gear train
D.piston to the crankshaft