Which of the following are considered private IPv4 addresses?（）

单项选择题The following output occurs on Router R1. IP SLA operation 1 uses an ICMP echo operation type, with default frequency of 60 seconds. The operation pings from address 1.1.1.1 to address 2.2.2.2. Which of the following answers is true reg arding IP SLA and object tracking on R1?（） R1# show track Track 2 IP SLA 1 state State is Up 3 changes, last change 00:00:03 Delay up 45 secs, down 55 secs Latest operation return code: OK Latest RTT (millisecs) 6 Tracked by: STATIC - IP - ROUTING 0

A. The tracking return code fails after the SLA operation results in an ICMP echo failure three times.
B. The tracking return code fails after the SLA operation results in an ICMP echo failure one time.
C. After the tracking object fails, the tracking o bject moves back to an up state 45 seconds later in all cases.
D. After moving to a down state, the tracking object moves back to an OK state 45 seconds after the SLA operation moves to an OK state.

单项选择题The following configuration commands exist only in an implementation plan document. An engineer does a copy paste of these commands into configuration mode on Router R1. Which of the following answers is m ost accurate regarding the results?（） ip sla 1 icmp - echo 1.1.1.1 source -ip 2.2.2.2 ip sla schedule 1 start - time now life forever

A. The SLA operation will be configured but will not start until additional commands are used
B. The SLA operation is not comp letely configured so it will not collect any datA
C. The SLA operation is complete and working, collecting data into the RTTMON MIB
D. The SLA operation is complete and working but will not store the data in the RTTMON MIB without more configuration

多项选择题Which of the following are examples of traffic that can be created as part of an IP Service -Level Agreement operation?（）

A. ICMP Echo
B. VoIP (RTP)
C. IPX
D. SNMP

单项选择题The following output occurs on Router R2. Which of the following statements can be confirmed as true based on the output from R2?（） R2# show ip policy Interface Route map Fa0 0 RM1 Fa0 1 RM2 S0 0 0 RM3

A. R2 will forward all packets that enter Fa0/0 per the PBR configuration.
B. R2 will use route map RM2 when determining how to forward packets that exit interface Fa0/1.
C. R2 will consider using PBR for all packets exiting S0/0 /0 per route map RM3.
D. R2 will consider using PBR for all packets entering S0/0/0 per route map RM3.

多项选择题Examine the following configuration on Router R1. R1s show ip route 172.16.4.1 command list s a route with outgoing interface S0 1 1. Host 172.16.3.3 uses telnet to connect to host 172.16.4.1.What will Router R1 do with the packets generated by host 172.16.3.3 because of the telnet,assuming the packets enter R1s F0 0 interface?（） interface Fastethernet 0 0 ip address 172.16.1.1 255.255.255.0 ip policy route - map Q2 ! route - map Q2 permit match ip address 101 set interface s0 0 1 ! access - list 101 permit tcp host 172.16.3.3 172.16.4.0 0.0.0.255

A. The packet will be forwarded out S0/0 /1, or not at all.
B. The packet will be forwarded out S0/0/1 if it is up.
C. The packet will be forwarded out S0/1/1 if it is up.
D. The packet will be forwarded out S0/1/1 if it is up, or if it is not up, out s0/0/1.
E. The packet will be forwarded o ut S0/0/1 if it is up, or if it is not up, out s0/1/1.