单项选择题

Refer to the exhibit. What is the effect on the trust boundary of configuring the command mls qos trust cos on the switch port that is connected to the IP phone？（）

A. Effectively the trust boundary has been moved to the IP phone.
B. The host is now establishing the CoS value and has effectively become the trust boundary.
C. The switch is rewriting packets it receives from the IP phone and determining the CoS value.
D. The switch will no longer tag incoming voice packets and will trust the distribution layer switch to set theCoS
E. RTP will be used to negotiate a CoS value based upon bandwidth utilization on the link.

<上一题目录下一题>

热门试题

单项选择题Refer to the exhibit. Which statement is true about a voice VLAN？（）

A. Physically the voice network and the data network are separate.
B. The voice traffic will normally be on a different IP subnet than will the data traffic.
C. End user intervention is necessary to place the phone into the proper VLAN.
D. The same security policy should be implemented for both voice and data traffic.
E. The data VLAN must be configured as the native VLAN.

多项选择题Whichtwomulticastprotocolstatementsaretrue？（Choosetwo.）（）

A. Dense mode multicast requires explicit join messages from their members.
B. Dense mode multicast uses a push model to flood traffic throughout the network and then prunes the unwanted traffic.
C. Sparse mode multicast uses a pull model to send multicast traffic to where it is requested.
D. Sparse mode uses reverse path forwarding （RPF） to prune off redundant flows.
E. The primary use of sparse mode multicast is for test labs and router performance testing.

多项选择题WhichthreeIPmulticastgroupconceptsaretrue？（Choosethree.）（）

A. If a packet is sent to a multicast group address， all members of the multicast group will receive it
B. If a packet is sent to a multicast group address， the multicast frame contains the source multicast address
C. A router does not have to be a member of a multicast group to receive multicast data.
D. A router does not have to be a member of a multicast group to send to the group.
E. A router must be a member of a multicast group to receive multicast data.
F. A router must be a member of a multicast group to send to the group.

多项选择题WhichthreeIPmulticastrelatedstatementsaretrue？（Choosethree.）（）

A. Multicast addresses 224.0.1.0 through 238.255.255.255 are called globally scoped addresses. They are used to multicast data between organizations and across the Internet
B. The multicast address 224.0.0.1 is a globally scoped address that has been reserved for the Network Time Protocol （NTP） by the IANA
C. Multicast addresses 239.0.0.0 through 239.255.255.255 are called limited scope addresses. They are constrained to a local group or organization
D. Multicast addresses 224.0.0.5 and 224.0.0.6 are limited scoped addresses that have been reserved for OSPF
E. Multicast addresses 224.0.0.0 through 224.0.0.255 are used for network protocols on local LAN segments. Because they are always transmitted with a Time to Live （TTL） of 1， they are never forwarded by a router

多项选择题WhichthreeIPmulticastaddressrelatedstatementsaretrue？（Choosethree.）（）

A.Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live （TTL） greater than 1.
B.Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers.
C.Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link-local addresses used by PIMv2 and IGMPv3.
D.Because they would map to overlapping IP multicast MAC addresses， multicast addresses 224.0.1.1 and 238.1.1.1 could not be used together.
E.Multicast address 224.0.1.1 has been reserved for the Network Time Protocol （NTP） by the IANA
F.The administratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses.