单项选择题

After rebooting one Virtual IO （VIO） server in a redund……

After rebooting one Virtual IO （VIO） server in a redundant environment， the following command output from the client partition shows that the path to the shared disk from the rebooted VIO server remains in a failed state.
Vio_client1# lspath Failed hdisk0 vscsi0 Enabled hdisk0 vscsi1 What must the administrator do to ensure that the path is automatically restored when a VIO server is brought back into service？（）

A. On both VIO servers， modify the inittab making chdev the last command， so that they will start during VIO server reboot.
B. On both VIO servers， change the following parameters and reboot each of them in turn hcheck_interval =60 hcheck_mode=interactive
C. On client logical partition， modify the inittab making chdev the last command， so that they will start during client partition reboot.
D. On the client logical partition， change the following parameters and reboot the client hcheck_interval =60 hcheck_mode=interactive

<上一题目录下一题>

热门试题

单项选择题A customer recently acquired two Power servers and plans to implement AIX 6.1 and Live Application Mobility. What other product is required to accomplish this objective？（）

A. HACMP for AIX
B. PowerVM Enterprise Edition
C. IBM Management Edition for AIX
D. Workload Partition Manager for AIX

单项选择题Simultaneous Multithreading （SMT） is enabled in a POWER6 VIO client running AIX 6.1. Which command would be used to disable it after the next operating system reboot is performed？（）

A. schedo -o smt=0 -p
B. smtctl -m off -w boot
C. chdev -l sys0 -a smt=off
D. echo 0 > /proc/sys/smt_enable

单项选择题WhichofthefollowingIOScommandsdisplaysinformationaboutpathstoMultiPathIO（MPIO）devices？（）

A. fcrep
B. lssvc
C. fcstat
D. lspath

单项选择题A VIO server has two fibre channel adapters， fcs0 fcs1， attached for redundant access to a storage subsystem. If fcs1 has failed， what is the correct procedure to rectify this problem？（）

A. Using ’diagmenu’ command， set fcs1 to Defined.
B. Using ’oem_setup_env’ and ’rmdev -R’ commands， set fcs1 adapter to ’Defined’ state.
C. Using ’diagmenu’ command， set the fcs1 state to Defined
D. Using ’oem_setup_env’ and ’rmdev -dl’ commands， set the state of fcs1 to Defined

单项选择题WhichofthefollowingcandeploysystemplansgeneratedbytheIBMSystemPlanningTool（SPT）？（）

A. The Hardware Management Console （HMC） and Integrated Virtualization Manager （IVM）.
B. The Hardware Management Console （HMC） and Advanced System Manager Interface （ASMI）.
C. Integrated Virtualization Manager （IVM） and Advanced System Manager Interface （ASMI）.
D. Integrated Virtualization Manager （IVM） and BladeCenter Advanced Management Module （AMM）.