A、1/5 B、1/4 C、1/3
单项选择题起重作业是一项技术性(),危险性大,多工种联合作业的特殊工种作业。
A.强B.差C.较差
单项选择题桥式起重机垂直连续变速起吊重物,这时主梁受到的载荷是()。
A、动载荷 B、静载荷 C、冲击载荷
单项选择题流动式起重机工作时,必须要使自重载荷和起吊载荷对倾覆边的力矩之和()于零,才能不出倾翻事故。
A、大 B、小 C、等于
单项选择题在吊装重物时,千斤绳吊索的受力大小与()成反比。
A、千斤绳的根数 B、千斤绳和垂直线间夹角的正弦 C、千斤绳和垂直线夹角间的余弦
单项选择题起重机的起重臂由最大幅度到最小幅度的平均线速度是()。
A、起升速度 B、变幅速度 C、旋转速度 D、运行速度
单项选择题地锚基坑在回填时,每隔()夯实一次。
A、200㎜ B、300㎜ C、400㎜ D、500㎜
单项选择题机制线麻绳能承受的拉力的估算公式是()。
A、S=7.85d2 B、S=7.06d2 C、S=6.44d2 D、S=9.03d2
单项选择题起重机吊装过程中,钢丝绳有时会发生抖索现象,这是因为()。
A、起重量过大 B、滑轮组中有的滑轮不转 C、起吊速度不均匀
单项选择题与钢丝绳配用的滑轮直径过小会影响钢丝绳的使用()。
A、性能 B、寿命 C、效果
单项选择题用两台起重机抬吊设备时,吊钩下降快的起重机负荷()。
A、较轻 B、较重 C、不变 D、不能确定
单项选择题回转支撑装于转台和底座之间,除行走机构外,其他部分都装在转台上,依靠回转机构、塔身带着吊臂u、平衡臂一起旋转的塔吊是()。
A、上旋转式 B、下旋转式 C、中旋转式
单项选择题制定起重作业方案时,被吊物的重量一般可依据说明书、标牌或货物单确定,也可()来确定。
A、根据经验 B、用计算方法 C、试吊
单项选择题可以把()的几何图形分割成几种规则或近似规则的图形分别计算出面积,然后相加,求出总面积。
A、规则 B、不规则 C、不复杂
单项选择题转动式桅杆在竖立时,缆风绳的根数不少于()根。
A、3 B、4 C、5 D、6
单项选择题物体的重力作用线超出物体支承面之外,物体就失去平衡,此时物体处于()状态。
A、倾覆 B、不稳定 C、稳定