单项选择题

Forthep5590andp5595servers,theHMCmustbedirectlyattached……

For the p5 590 and p5 595 servers, the HMC must be directly attached. Why is the use of a private service network between HMC and the p5 590 required?（）

A.The Bulk Power Controllers are dependent upon the HMC to provide them with DHCP addresses.
B.A firewall is required to isolate the private network from any of the open networks to which the HMC is attached.
C.Network communications can be implemented through an open network. No private network is required but it is recommended.
D.All p5 590 and 595 servers are shipped with one service processor card. A private network is required to manage DHCP addresses.

<没有了目录下一题>

热门试题

单项选择题Companycom has several CR3 HMCs managing their p690 servers. They have purchased a new p5 570 and would like to manage the new system with an existing HMC. What is required to support this environment?（）

A.Free up one HMC and update the software for use with the p5 570
B.Connect the new p5 570 server to an existing HMC and manage the p690s and p5 570 from that HMC
C.Order a new HMC to support the new p5 570 server since the CR3 HMC is not supported for a p5 570
D.Backup the HMC to DVD-RAM and select HMC migrate to move all the profile data to the new HMC software

单项选择题Companycomneedstoruna32bitkernelunderAIX5.3.Whatstepsneedtobedonetoaccomplishthiswiththeleastdisruptionsincethesystemisalreadyinstalledwitha64bitkernel?（）

A.Reload the operating system and select 32 bit kernel on initial install.
B.Repoint the symbolic link of /unix to unix_mp. Perform a bosboot and reboot the partition.
C.Use the SMIT menu to select 32 bit versus the 64 bit kernel. Select 32 bits and reboot the partition.
D.Go into SMIT and select 32 bit kernel. Run the /usr/sbin/bootinfo -K command， and ensure that the kernel has been changed.

单项选择题Companycom has seven days of vmstat data on a p5 590. The server has a total of four test dev LPARs and 4 production LPARs of one processor each. On the four test dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak. What is the best configuration to fully utilize the processor resource?（）

A.Set up the server in SMP mode and use WLM to manage resources effectively
B.Set up eight dedicated LPARs and use DLPAR to manage resources effectively
C.Set up a shared pool with eight capped LPARs including production and test/dev
D.Set up a shared pool with eight uncapped LPARs with priority weight to Production

单项选择题CompanycomwantstheapplicationserverLPARtocommunicatewiththedatabaseLPARonap5590withoutusingnetworkadapters.Whatdoesthecustomerneedtoinstall?（）

A.VIO Server
B.AIX 5.2 ML4
C.Shared Ethernet Adapter
D.AIX 5.3 with Advanced Power Virtualization

单项选择题Acompanywantstobuymemoryefficientlyontheirp5590toallowforthebestperformance.Whatisthebestpracticeforaddingmemoryforperformance?（）

A.Install more cards of smaller capacity and same size across MCMs. Use DDR2(dual data rate) memory if using HPC (High Performance Computing).
B.Install fewer cards of larger capacity of the same size across MCMs. Servers with one processor book must have a minimum of four memory cards installed.
C.Intermix DDR1 and DDR2 memory so that partitions requiring the higher performance can take advantage of them. Half of the available memory slots in the system should contain memory.
D.Use fewer higher density memory cards so that a few memory slots are left open for future growth. Each processor book provides sixteen memory card slots. The p5 590 supports a maximum of 64 memory cards.