单项选择题

Whatistheuseofan allconfiguration backupinCiscoUCS？（）……

What is the use of an "all configuration" backup in Cisco UCS？（）

A. Can be used to migrate from a 6120 to a 6140 and retain the same service profiles
B. Can only be used on the fabric interconnect on which it was created
C. Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster information
D. Can be used to match firmware versions between 6120 and 6140 during a migration

<上一题目录下一题>

热门试题

单项选择题WhichstatementistrueregardingBackuptasksinCiscoUCS？（）

A. They are created automatically and stored on the FI
B. They are created manually and exported to a remote server
C. They are automatically scheduled to run every 24 hours
D. They are manually scheduled and stored on the FI

单项选择题Whenwillan allconfiguration backupbeimportedintotheCiscoUCSManager？（）

A. During the initial configuration from the console
B. Once the basic configuration has been applied
C. To restore the configuration on a secondary fabric interconnect
D. To upgrade the firmware on a replacement fabric interconnect

单项选择题InaCiscoUnifiedComputingSystem，whereareSANportchannelsconnectedto？（）

A. Only to Cisco Fibre Channel switches
B. Only to Cisco Fibre Channel switches in NPIV mode
C. To any Fibre Channel switch
D. Directly to storage arrays
E. Only to Nexus Switches

单项选择题WhereareSANPortChanneliscreatedinUCSManager？（）

A. Under the Admin tab on the FI
B. Under the Server tab in the service profile
C. Under the SAN tab on each VSAN
D. Under the Admin tab on the chassis
E. Under the SAN tab on the Fabric Interconnect

单项选择题Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2 3 Member[2] ： fc2 4 What does Speed is 8 Gbps indicate？（）

A. The speed of the slowest interface in the port channel
B. The combined speed of all interfaces configured in the port channel
C. The combined speed of all interfaces in the port channel that are up
D. The speed that can be achieved if all buffers are used