简答题 翻译：crude petroleum is not an equilibrium mixture, and on a geological time scale its composition is slowly changing. S.R.silverman found that heating at 121C for two weeks caused detectable changes, the low-molecular-weight components formed being isotopically lighter so far as the carbon was concerned, than the original.

问答题翻译：A third means of assessing the maturity of rocks is by the pyrolysis of a small amount of the source rock. The temperature is raised rapidly and the material vaporized or formed by thermal breakdown of the kerogen is passed through a detector which records, on a temperature base, peaks representing these two bursts of volatile material. To a first approximation the peak at the lower temperature represents oil already generated; the peak at the higher temperature indicates oil capable of being generated at adequate maturity.

问答题翻译：A paraffin base crude is an oil whose chief components are paraffins, and which completely distilled, leaves a solid residue of wax. An asphalt base crude is an oil composed primarily of cyclic compounds (mostly naphthenes) which, when distilled, leaves a solid residue of asphalt. Oils which fall in the middle of these categrories are classified as mixed base.

问答题翻译：The fluids of a petroleum reservoir are generally gas, oil, and water in varying proportions. Each phase can differ widely in composition and properties. Gas and oil, either as separate fluids or in mixtures, change their state or phase as reservoir pressure changes.

问答题翻译：Since the volume factors and the solution gas-oil ratio are determined from laboratory measurements on samples of reservoir fluid at reservoir temperature and various pressures, these parameters are effective substitutes for detailed phase equilibrium data in most production calculations. However, these parameters are unknown at the time that exploration well tests are run, and hence they are estimated from correlation charts.

问答题翻译：A porous medium has a permeability of one darcy when a single phase fluid of one centipoise viscosity that completely fills the voids of the medium, will flow through it under conditions of viscous flow at a rate of one cubic centimeter per second per square centimeter cross sectional area under a pressure or equivalent hydraulic gradient of one atmosphere per centimeter.