单项选择题

A.Install a VIO partition to share the tape drive.B.Pur……

Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape.
Which of the following actions will enable the creation of the partitions with minimal intervention？（）

A.Install a VIO partition to share the tape drive.
B.Purchase three external SCSI adapters and physically move the tape drive when needed.
C.Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.
D.Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.

<上一题目录下一题>

热门试题

单项选择题One of Company.com’s Linux partitions is experiencing excessive paging. They want to provide more memory to the partition to resolve this problem. What is the best method to add the memory？（）

A.Add an additional virtual swap device to the partition.
B.Use DLPAR to dynamically add the required memory to the partition.
C.Shut down the partition and redefine its profile with additional memory.
D.Change Partition Load Manager parameters to provide the partition with additional memory shares.

单项选择题WhendoingcapacityplanningfortheVirtualI OServer，whatisthemostimportantconsideration？（）

A.The I/O workload needs of the client LPARs
B.The processing requirements of the client LPARs
C.The memory requirements of the client LPARs
D.The virtual Ethernet requirements between client LPARs

单项选择题What is the correct sequence to set up a Virtual I O Server？（） 1.Boot to SMS 2.Create the VIOS partition 3.Install VIOS software 4.Accept license

A.4， 2， 1， 3
B.2， 1， 4， 3
C.2， 1， 3， 4
D.1， 2， 3， 4

单项选择题Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： usr lib methods cfgsea . Which of the following will most likely resolve the problem？（）

A.Run cfgdev on the VIO server and re-run the mkvdev command.
B.Run chdev -a sea_enable=yes on the physical Ethernet adapter.
C.Remove and re-add the virtual Ethernet adapter.
D.Remove the IP address from the physical adapter and re-run the mkvdev command.

单项选择题A system administrator is deploying a new POWER5 server. The application requires AIX 5L V5.2. Which of the following virtualization technologies can be used？（）

A.DLPAR
B.Micro-Partitioning
C.Virtual Storage
D.Virtual Ethernet