A.cdma2000 B.WCDMA C.TD-SCDMA D.IS-95B
单项选择题NODEB同RNC建立IUB接口传输可通过以下哪种单板。()
A.WMPT/UTRP B.UEIU C.WBBP D.UPEU
单项选择题下面哪条命令是可以验证小区是否建立。()
A.LST UCELL B.DSP UCELL C.LST LOCELL D.DSP LOCELL
单项选择题在3G一个BBU里传输接口UTRP板只能插到()槽位上。
A.0槽 B.1槽 C.4槽或5槽 D.6槽
单项选择题在3G一个BBU的多块WBBP单板里载波光模块只能接在WBBP的槽位有()。
A.0槽 B.1槽 C.4槽 D.3槽或2槽
单项选择题在3G一个BBU的多块WBBP单板里最多可以直联载波的CPRI接口有几个?()
A.3 B.4 C.5 D.6
单项选择题在2G中GTMU接口DB26的2M线的端口号与8根同轴线的线序对应关系正确的是()。
A.端口0对应:TX0=2,RX0=1; 端口1对应:TX1=4,RX1=3; 端口2对应:TX2=6,RX2=5; 端口3对应:TX3=8,RX3=7。 B.端口0对应:TX0=1,RX0=2; 端口1对应:TX1=3,RX1=4; 端口2对应:TX2=5,RX2=6; 端口3对应:TX3=7,RX3=8。 C.端口1对应:TX0=1,RX0=2; 端口2对应:TX1=3,RX1=4; 端口3对应:TX2=5,RX2=6; 端口4对应:TX3=7,RX3=8。
单项选择题在2G中BBU的主控板GTMU最多可以连接的E1数量是()。
A.3条 B.4条 C.5条 D.8条
单项选择题室内线不超过()时,室外皮线可直接引入室内,连接话机。
A.5m B.10m C.15m D.20m
单项选择题在装机施工时,皮线在进入用户室内前(),进入室内后的接头应处理良好,用防水胶布缠牢。
A.最多允许有两个接头 B.最多允许有一个接头 C.不允许有接头 D.对接头没有要求,只要能满足线路通信质量即可
单项选择题对城域网的范围描述最确切的是()。
A.几十米内 B.几十公里内 C.几十米几公里内 D.十到一百公里内
多项选择题OLT是整个EPON系统的核心部件,主要完成的功能有()。
A.发起并控制ONU功率控制 B.发起并控制测距过程,并记录测距信息 C.对用户的以太网数据进行缓存,并在OLT分配的发送窗口中向上行方向发送 D.其它相关的以太网功能
多项选择题PON系统可能承载的业务类型包括()。
A.以太网/IP业务 B.语音业务 C.TDM业务 D.CATV业务
多项选择题安装ADSL后当有电话进来时,线路就自动掉线且有很大噪音出现故障原因是()。
A.家中使用的是分机,而且连接到分机的电话线没有通过分离器进行连接; B.电脑中毒或线路不稳定; C.可能是离器是否有问题; D.其他家用电器的干扰。
多项选择题下列哪些设备需要进入LAN板才能配置VLAN()。
A.MA5100、MA5103 B.MA5600 C.MA5605 D.UA5000
多项选择题广州联通宽带类型主要包括()。
A.CNET楼宇PPPoE拨号用户 B.CPN小区PPPoE拨号用户 C.DSLAM(XDSL)PPPoE和静态IP用户 D.DIA专线静态IP用户