A.50-100 B.150-200 C.400-500 D.800-1000
单项选择题电话无法出局的原因可能是?()
A.呼叫限制 B.呼叫转移 C.来电免打扰 D.寻线
单项选择题交换机的用户电路馈电电压一般为?()
A.-12V B.-24V C.-36V D.-48V
单项选择题我国规定的电话铃流电压为多少?()
A.45±15V B.60±15V C.75±15V D.90±15V
单项选择题子钟在接收到标准时间信号后,回送自身工作状态给()。
A.一级母钟 B.二级母钟 C.终端设备 D.监控设备
单项选择题中心母钟对二级母钟是()的关系,而不是绝对的指挥关系。
A.校对 B.上下级 C.对等 D.同级
单项选择题中心母钟和二级母钟均采用(),便于设备的维护又便于系统的扩容。
A.独立供电 B.热插拔 C.双重热备份 D.校对功能
单项选择题在母钟正常工作时,其电源指示灯为()。
A.灭 B.闪烁 C.亮 D.闪亮
单项选择题中心母钟与集中告警系统的通信接口,一般为标准()接口。
A.RS385 B.RS322 C.RS422 D.RS232
单项选择题时钟系统车站、车辆段设备属于()设备。
A.中心级 B.车站级 C.分段 D.区域
单项选择题从一级母钟到二级母钟的传输信道可考虑采用点到点的方式,即采用()方式,传输信道简单、可靠、维护方便。
A.总线型 B.环型 C.星型 D.混合型
单项选择题主母钟显示正常的(),备母钟显示正常的日期。
A.星期 B.日期 C.时间 D.月份
单项选择题一级母钟设备POW灯正常为()。
A.常亮 B.闪烁 C.灭 D.时亮时灭
单项选择题OTDR测量范围是指OTDR获取数据取样的()。
A.最大距离 B.最小距离 C.适宜距离 D.中间距离
单项选择题OTDR最终显示的测量结果是通过接收返回的光脉冲信号,并对多次的信号进行作()处理而成。
A.汇总 B.平均化 C.去掉最大值 D.去掉最小值
单项选择题在OTDR参数设置中,影响反射与回波损耗的测量结果的是以下哪个()。
A.波长 B.后向散射系数 C.测量次数 D.折射率参数