A.每年 B.每两年 C.每3年 D.每5年
单项选择题发动机冷却系大、小循环的区别在于冷却水是否流经()。
A.水套B.节温器C.散热器D.水泵
单项选择题当发动机转速升高时,希望进气门()。
A.早点打开 B.晚点关闭 C.早点关闭 D.相位不变
单项选择题本田VTEC可变配气机构调整的是()。
A.配气相位 B.气门升程 C.相位和升程 D.凸轮转速
单项选择题当一缸的活塞处于压缩上止点时可调该缸的()气门。
A.进 B.排 C.进排 D.都不可调
单项选择题直列四缸发动机凸轮轴上相邻作功两缸的同名凸轮之间夹角为()度。
A.60° B.90° C.120° D.180°
单项选择题气门提前角是与气门在上止点以前开启的程度相对应的()转角。
A.凸轮轴 B.曲轴 C.正时齿轮 D.飞轮
单项选择题采用顶置式气门是因为()。
A.传动方便 B.结构简单 C.燃烧室紧凑 D.开闭及时
单项选择题发动机在排气上止点时()。
A.进气门开,排气门关B.排气门开,进气门关C.进气门关,排气门关D.进气门开,排气门开
单项选择题四冲程发动机一个工作循环凸轮轴共旋转()。
A.一周 B.两周 C.三周 D.四周
单项选择题若缓慢踏加速踏板时加速尚可,急加速时转速不易提高且有“突突”声则故障为()。
A.怠速过高 B.怠速过低 C.加速不良 D.混合气过浓
单项选择题混合气过浓,将会造成发动机()运转不良,有抖动,化油器有回火现象。
A.加速 B.减速 C.怠速 D.急加速
单项选择题发动机无负荷时,踏下加速踏板,发动机转速不易提高,()有回火现象,说明油路有故障。
A.化油器 B.分电器 C.排气管 D.消音器
单项选择题混合气()会造成发动机不易启动,启动后排气管冒大量黑烟,并伴有“突突”声。
A.过稀 B.过浓 C.较浓 D.较稀
单项选择题活塞行程是()到活塞下止点的距离。
A.活塞上止点 B.活塞直径 C.活塞销 D.活塞头部
单项选择题活塞在离曲轴回转中心最远处时,与活塞顶最高点相对应的汽缸壁上的位置,称为()。
A.曲轴半径 B.活塞上止点 C.汽缸总容积 D.压缩比