A、200 B、300 C、400 D、500
单项选择题YCW100B型轻量化千斤顶的公称油压为()MPa。
A、24 B、33 C、42 D、51
单项选择题BX1—400型交流弧焊机的额定负载持续率为()%。
A、30 B、40 C、50 D、60
单项选择题UN1—75型对焊机每小时最多可完成焊接件数为()件。
A、100 B、90 C、85 D、75
单项选择题使用对焊机进行连续闪光焊操作时,必须打开冷却水,出水温度不得超过()。
A、40℃ B、50℃ C、60℃ D、70℃
单项选择题对工程中使用的预应力筋及其锚、夹具,除做()外还须按批量取试件作强度和弯折试验。
A、外观检查 B、冷拉率检查 C、焊接性能测试 D、化学成分分析
单项选择题在大跨度造桥机一次性现场浇筑预应力箱梁的识图过程中,要注意跨间横隔梁交叉点位与其他()的相互关系。
A、相连构件 B、锚固钢筋 C、钢筋和预应力管道 D、钢筋和预应力筋
单项选择题审核牛腿柱图纸时,通过总体各部位的标高,计算出牛腿柱的实际长度及牛腿所在位置,再核对牛腿柱(),核对无误后方可安排加工绑扎。
A、总体分布 B、单件图的设计尺寸 C、钢筋总量 D、钢筋品种
单项选择题进行箱形基础识图时,首先要通过()等。
A、模板图认清保护层厚度、排水管道的位置 B、剖面图认清各部位的标高、底、墙、顶的厚度 C、平立面布置图了解该基础的外形尺寸 D、钢筋详图了解箱形基础的钢筋分布
单项选择题结构施工图的图纸目录应详列结构施工图中所有设计图纸及()的名称、编号。
A、所用标准图 B、水文地质资料 C、抗震、抗冻、抗风力等级 D、所有构件代号
单项选择题绘制钢筋布置图时,在()中被剖面位置切开的钢筋应画成圆形黑点。
A、立面图 B、平面图 C、详图 D、断面图
单项选择题绘制钢筋布置图时,在正、立面图中,钢筋用()、粗实线绘制。
单项选择题在钢筋混凝土梁中,箍筋直径不宜()。
A、小于6mm B、小于12mm C、大于6mm D、大于3mm
单项选择题冷拔钢筋过程中,每道工序的钢筋冷拔()应按机械出厂说明书的规定选择,不得超量缩减模具孔径。
A、直径 B、长度 C、等级 D、截面面积
单项选择题冷拉设备应根据冷拉钢筋的()进行合理选择,不允许超载张拉。
单项选择题钢筋在加工过程中,若发生脆断,则应对该批钢筋进行()检验。