多项选择题

A. Cisco DCNM-LAN server users are local to the Cisco D……

Which three statements describe user authentication in Cisco DCNM-LAN？（）

A. Cisco DCNM-LAN server users are local to the Cisco DCNM-LAN server. Creating， changing， and removing Cisco DCNM-LAN server users has no effect on user accounts on managed devices.
B. A Cisco DCNM-LAN server user that has Administrator privileges can push out changes to managed devices even if the Cisco NX-OS role that is used on the discovered device has the network operator role.
C. Cisco DCNM-LAN user roles restrict the ability of users to make changes to Cisco DCNM-LAN server settings. Cisco NX-OS user roles enforce read/write privileges on the discovered devices.
D. Cisco DCNM-LAN allows you to configure unique credentials for each discovered device or use default credentials when you do not configure unique credentials for a device.
E. Cisco DCNM-LAN can use AAA servers to authenticate users. Only TACACS servers are supported.

<上一题目录下一题>

热门试题

多项选择题WhichthreestatementsabouttheDHCPsnoopingfeatureonCiscoNexusswitchesaretrue？（）

A. DHCP snooping commands are not available until the feature is enabled with the feature dhcp- snooping command.
B. When you enable the DHCP snooping feature， the switch begins building and maintaining the DHCP snooping binding database.
C. The switch will not validate DHCP messages received or use the DHCP snooping binding database to validate subsequent requests from untrusted hosts until DHCP snooping is enabled globally and for each specific VLAN.
D. Globally disabling DHCP snooping removes all DHCP snooping configuration on the switch.
E. Globally disabling DHCP snooping does not remove any DHCP snooping configuration or the configuration of other features that are dependent upon the DHCP snooping feature.

单项选择题OverlayTransportVirtualization（OTV）usestheAuthoritativeEdgeDevice（AED）toperformwhichtasks？（）

A. The AED is responsible for sending all unicast traffic in a site， while either node in a site can transmit multicast and broadcast.
B. The AED is responsible for load balancing all traffic for all VLANs across the transport network.
C. The AED is responsible for handling all unicast， broadcast， and multicast traffic for a given VLAN within a site.
D. The AED is responsible for MAC address dispute contention for a given VLAN.

单项选择题WhichstatementbestdescribesACLconfigurationusingconfigurationsessionmodeonCiscoNexusswitches？（）

A. The verify command will validate commands entered for syntax errors.
B. The save command will save the commands entered to the startup configuration.
C. The network administrator can perform a dry-run ACL configuration by verifying the configuration against the hardware and software resources available before applying it.
D. Configuration sessions can be saved and resumed at any time， even after upgrading NX-OS Software on the switch with ISSU.
E. Configuration sessions are global for all VDCs on the Nexus 7000.

单项选择题WhatisthebenefitofusingAnycastRPviaRFC4610forIPmulticastRPredundancy？（）

A. Improves convergence of the multicast network due to enhanced RPF checks
B. Simplifies the number of control plane protocols over other RP redundancy methods
C. Eliminates the use of Protocol Independent Multicast （PIM） in the topology
D. Increases the administrative distances in Multicast Source Discovery Protocol （MSDP） configuration

单项选择题2012 Feb 23 23：00：08.676710 pim： [16132] （default-base） Received unauthenticated hello- message from 10.1.1.2 on Ethernet1 18， message discarded 2012 Feb 23 23：00：12.528763 pim： [16132] （default-base） Send Hello with AH on Ethernet1 18 from 10.1.1.1， holdtimE. 105 secs，dr-priority：1 You are troubleshooting a PIM neighbor adjacency that is not coming up. You issued the command show ip pim neighbor e1 18 and confirmed there is no PIM neighbor on the interface. What is the problem based on the debug output？（）

A. The peer router 10.1.1.2 has PIM disabled on its interface connecting to Ethernet1/18.
B. The peer router 10.1.1.2 has the wrong PIM password configured on its interface connecting to Ethernet1/18.
C. The local router 10.1.1.1 has the wrong PIM password configured on Ethernet1/18.
D. The peer router 10.1.1.2 does not have PIM hello authentication enabled on its interface connecting to Ethernet1/18.
E. The local router 10.1.1.1 does not have PIM hello authentication enabled for Ethernet1/18.