单项选择题

A. The Ethanalyzer captures control-plane traffic， whil……

What is the difference between the Ethanalyzer and the SPAN feature in Cisco NX-OS？（）

A. The Ethanalyzer captures control-plane traffic， while SPAN captures all traffic.
B. The Ethanalyzer captures all traffic including control-plane traffic， while SPAN captures only the control-plane traffic.
C. The Ethanalyzer captures only data traffic， while SPAN captures all traffic.
D. The Ethanalyzer captures only control traffic， while SPAN captures data traffic.

<上一题目录下一题>

热门试题

单项选择题WithCiscoNX-OSonaCiscoNexusplatform，whichcommandshowsmemoryusage，totalprocesses，andCPUstate？（）

A. show memory detailed
B. show process cpu sorted
C. show system resources
D. show hardware capacity

单项选择题WhichcommandwillallowyoutodisplaytheconfiguredQoSgroupandtheingressbufferallocatedtoeachQoSgroup？（）

A. show interface priority-flow-control
B. show interface queuing
C. show queuing interface
D. show policy-map system type queuing
E. show policy-map interface ethernet type queuing

单项选择题Nexus7000# config t Nexus700（config）# interface ethernet 2 11 Nexus700（config-if）# switchport mode private-vlan host Nexus700（config-if）# switchport private-vlan host-association 14 50 Nexus700（config-if）# exit Nexus700（config）# What will this command sequence achieve？（）

A. associate interface E2/11 to community VLANs 14 and 50
B. associate interface E2/11 to secondary VLANs 14 and 50
C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14
D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50

多项选择题EachportthatisconfiguredtouseLACPhasanLACPportpriority.WhichstatementsaretrueaboutLACPportpriority？（）

A. Port priority value can be configured between 1 and 65535.
B. A higher port priority value means a higher priority of LACP.
C. Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
D. LACP uses the port priority with the port number to form the port identifier.
E. LACP Port priority default value should always be changed

单项选择题WhichattributeisusedtopasstheuserrolebacktotheNexuswhenremoteAAAisenabled？（）

A. Cisco AV-pair
B. TACACS+ or RADIUS ack frame role attribute
C. DH-CHAP challenge attribute
D. privilege level attribute