单项选择题

WhichfeatureoftheIBMp5serversenablescustomerstobeconfid……

Which feature of the IBM p5 servers enables customers to be confident that data within two distinct partitions on the server will be isolated？（）

A.POWER Hypervisor
B.Virtual LAN
C.POWER5 processor
D.Redundant Power and Cooling

<上一题目录下一题>

热门试题

单项选择题A technical specialist has installed a Host Bus Adapter （HBA） on a p5-550 server. The system has four AIX 5L V5.3 partitions and a Virtual I O server. The HBA will be used to connect all four partitions to a DS8000 storage array. What else must be performed to make the storage available to the partitions？（）

A.Allocate the HBA to a client partition.
B.Restart the Virtual I/O Server to detect the changes.
C.Install the device driver for the DS8000 in each of the four AIX partitions.
D.Allocate the HBA to the VIO server partition and install necessary drivers.

单项选择题WhencreatingavirtualEthernetadapterontheHMCforaVIOserver，whatistheadvantageofcheckingtheboxtoaccessexternalnetwork（trunk）？（）

A.Allows the creation of a shared Ethernet adapter
B.Allows the use of VLANs
C.Allows the consolidation of multiple networks on one adapter
D.Allows EtherChannel load balancing

单项选择题Company.com recently experienced an unanticipated system outage when the VIO server was upgraded. The current p5-570 has six Micro-Partitions and a VIO server partition. How can a similar outage be avoided in the future？（）

A.Use DLPAR to avoid an outage.
B.Deploy a redundant VIO server in the POWER5 system.
C.Add additional Host Bus Adapters and Network adapters to the VIO server.
D.Implement a standby server and move all partitions to it before applying future updates.

单项选择题Whenplanningforalogicallypartitionedsystem，whichofthefollowingshouldbeusedaspartofareviewtoensurethateachpartitionhastherequiredresources？（）

A.Use the Workload Estimator capacity planning tool.
B.Use prtconf output from legacy systems.
C.Use the LPAR Validation Tool.
D.Use Performance Management Services.

单项选择题A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical adapter， ent0. Which of the following commands should be used to configure the Shared Ethernet Adapter？（）

A.mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid 1
B.mkdev -virtual ent0 -adapter ent3 -default en2 -defaultid 1
C.mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid 1
D.mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid 1