单项选择题

A.If one screw is stopped，the ship will turn toward the……

A twin-screw vessel with a single rudder is making headway. The engines are full speed ahead. There is no wind or current. Which statement is FALSE?（）.

A.If one screw is stopped，the ship will turn toward the side of the stopped screw
B.The principal force which turns the ship is set up by the wake against the forward side of the rudder
C.Turning response by use of the rudder only is greater than on a single-screw vessel
D.With the rudder amidships，the ship will steer a fairly steady course

<上一题目录下一题>

热门试题

单项选择题A single-screw vessel going ahead tends to turn more rapidly to port because of propeller（）.

A.discharge current
B.suction current
C.sidewise force
D.thrust

单项选择题A record of the types and strengths of steels used on a ship must be included in the（）.

A.general plans
B.builder's documentation
C.Certificate of Inspection
D.construction portfolio

单项选择题A liner in riveted construction of a vessel is a(n)（）.

A.small plate which fills the aperture between riveted strakes and the vessel framing
B.backing plate which is used to level the strakes while riveting，and then removed
C.internal frame to which the side shell is riveted
D.seam that is welded after riveting is completed

单项选择题A large vessel is equipped with a controllable pitch propeller. Which statement is TRUE?（）.

A.When dead in the water，it is often difficult to find the neutral position and slight headway or sternway may result
B.When going directly from full ahead to full astern，there is complete steering control
C.When the vessel has headway and the propeller is in neutral，there is no effect on rudder control
D.When maneuvering in port，full ahead or astern power can usually be obtained without changing shaft RPM

单项选择题A heated bulkhead has the effect on a hygroscopic commodity of（）.

A.causing moisture to accumulate against the bulkhead
B.lowering the vapor pressure of the commodity
C.lowering the dew point of the air
D.raising the vapor pressure of the commodity