A.前刀面上 B.后刀面上 C.主后刀面 D.副后刀面
单项选择题刀具角度的选择,在工艺系统刚性较差或机床马达功率不足时,为减小切削力和切削功率和减轻震动,宜取()
A.较小前角 B.较大前角 C.0°前角 D.负值前角
单项选择题数控加工刀具,前刀面与副后刀面的交线称为()
A.主切削刃 B.副切削刃 C.前切削刃 D.后切削刃
单项选择题数控加工刀具,与工件上已加工表面相对的表面称为()
A.主后刀面 B.副后刀面 C.前刀面 D.后刀面
单项选择题数控加工刀具,与工件上过渡表面相对应的表面称为()
A.前刀面 B.后刀面 C.主后刀面 D.副后刀面
单项选择题数控加工刀具,切屑流过的表面叫()
单项选择题CNC机床上所用的切削刀具90%以上是()
A.陶瓷刀具 B.涂层刀具 C.立方氮化硼刀具 D.金刚石刀具
单项选择题工件直接安装在专门为其设计和制造的夹具中,无需进行找正就可快速可靠地保证工件对机床和刀具的正确相对位置,称为()
A.直接安装 B.间接安装 C.找正安装 D.专用夹具安装
单项选择题机械加工前,为保证加工精度,工件在机床的装夹表面上或夹具中,必须相对刀具及其切削成形运动,占据一个正确位置。这一过程称为()
A.装夹 B.定位 C.切削 D.占位
单项选择题有时直接安装需要以工件上某个表面或划线作为找正工件的基准,用划针或百分表找正后再夹紧,称为()
单项选择题例如利用三爪卡盘或电磁吸盘安装工件,直接安装工件无须另行找正即可夹紧,称为()
A.间接安装 B.直接安装 C.找正安装 D.专用夹具安装
单项选择题安装工件时,一般是()
A.先夹紧后定位 B.先定位后夹紧 C.只定位不夹紧 D.只加紧不定位
单项选择题影响表面粗糙度因素中,进给量f的影响:切削速度越高,进给量f越小,表面粗糙度值()
A.越小 B.越大 C.越趋向负值 D.越趋向波动
单项选择题增大刃倾角可以使刀具实际的前角加大,前角增大可以减小刀具前刀面挤压切削层形成的塑性变形,因此可以()
A.增加表面粗糙度 B.降低表面粗糙度 C.增加加工速度 D.降低加工速度
单项选择题机械加工中有一种力使工件表面组织自致密,腐蚀性介质不易侵入,有助于提高表面耐腐蚀能力,指的是()
A.残余拉应力 B.残余压应力 C.刀具摩擦力 D.夹具压力
单项选择题工件表面粗糙度过小则表面不能存储润滑油,使接触面产生黏合现象,使()
A.磨损减小 B.磨损加剧 C.磨损为零 D.磨损不确定