A.3℃ B.6℃ C.9℃ D.11℃
单项选择题采用合适的冷却器及其合理布局和冷却制度以维持合理的炉型,目前的发展趋势是()
A.普通工业水冷却 B.软水密闭循环冷却 C.汽化冷却
单项选择题“矮胖”型高炉和多风口,有利于(),有利于顺行。
A.强化冶炼 B.高炉长寿 C.降低焦比 D.提高鼓风动能
单项选择题煤气利用率最高的煤气分布类型是()
A.边缘发展型 B.中心发展型 C.双峰型 D.平坦型
单项选择题人造富矿、枕木开炉时,开炉料总焦比和正常料焦比一般为()
A.3.0~3.5;0.9~1.0 B.2.5~3.0;0.8~0.9 C.3.5~4.0;1.1~1.2 D.3.0~3.5;1.0~1.1
单项选择题生产铸造生铁时,()元素对球墨形成有害。
A.Zr B.Ni C.V D.Ca
单项选择题风温1000~1100℃时,风温降低100℃应提高焦比()kg。
A.15 B.20 C.25 D.30
单项选择题高钛渣冶炼时,在保证物理温度足够前提下,尽可能降低﹝Ti﹞含量,一般控制在﹝Ti﹞+﹝Si﹞=()%。
A.0.4 B.0.5 C.0.6 D.0.7
单项选择题高炉炉缸砌砖厚度一般在()mm,保证足够的铁口深度。
A.1050~1150 B.690~920 C.1250~1350 D.890~1020
单项选择题高炉内炉料下降的动力是()
A.气压 B.煤气的浮力 C.炉料与炉墙摩擦力 D.重力
单项选择题高炉煤气中CO的含量在()
A.20%以上 B.30%以上 C.10~20% D.15~18%
单项选择题高炉炉渣的碱度表达式是()
A.CaO/Al2O3 B.CaO/MgO C.CaO/SiO2 D.Al2O3/SiO2
单项选择题铁口打开后,发现撇渣器结盖砸不开,首先要()
A.立即减风堵铁口 B.加高下渣砂坝 C.加高主沟两侧沟邦 D.烧氧
单项选择题高炉内焦与矿呈层状分布,且都呈固态,以气固相反应为主的区间称为()
A.死料柱 B.固体炉料区 C.疏松焦炭区
单项选择题风温在900—1000℃时,干风温度变化100℃,约影响焦比()
A.2.5% B.3.5% C.4% D.17%
单项选择题放渣、出铁的渣、铁罐不准放满,上面应留足()毫米。
A.100~200 B.200~300 C.400 D.500