A.四个B.五个C.六个
单项选择题冲击试样的缺口方向是指()。
A.缺口长度方向B.缺口深度方向C.缺口宽度方向
单项选择题作为镀锡板镀锡量检验的仲裁法是()。
A.容量法B.库仑法C.射线法
单项选择题当铁的含硅量大于()时,在固态温度范围内不再发生铁的α-γ相变,即硅钢为单一的α-相固溶体。
A.0.8%B.1.8%C.2.16%
单项选择题夹杂物评定中B 系列指定作为含碳量()钢的带状组织评级。
A.0.31%~0.50%B.小于或等于0.15%C.0.16%~0.30%
单项选择题在产品不同位置取样时,力学性能()。
A.不变B.无差异C.有差异
单项选择题单片法测量无取向电工钢,试样基准方向与轧制方向的夹角允许有下述公差:取向硅钢片为()。
A.±0.5度B.±1度C.±2度
单项选择题游离渗碳体的试样抛光后用()的硝酸酒精溶液浸蚀。
A.3-4%B.6-8%C.9-10%
单项选择题测量脱碳层时,对于直径大于25mm的圆钢,或边长大于()的方钢,可截取试样同一截面的几个部分,但一定要取有代表性的部分。
A.10mmB.30mmC.20mm
单项选择题试验采用硬质合金球,测量范围的上限仍是()。
A.650HBWB.700HBWC.750HBW
单项选择题彩色涂层钢板的涂层方法大多采用()。
A.喷涂法B.辊涂法C.电解法
单项选择题时效冲击试验用于测定金属()时效冲击吸收功。
A.自然B.人工C.常温
单项选择题硫印检验是用硫酸溶液浸泡过的相纸紧密接触钢的检验面,检验面析出的硫化氢使感光乳剂的卤化银转变为硫化银而(),显示出硫的富集区域。
A.变黑B.变红C.变蓝
单项选择题试样截取的部位、数量和试验状态,按有关标准或双方协议的规定进行。生产厂应自()取样。
A.缺陷最严重部位B.任意C.缺陷最轻微部位
单项选择题重量法试验中用天平称量试样,其称量准确度应优于试样镀层预期质量的()。
A.1%B.2%C.5%
单项选择题厚度≥3mm板材矩形横截面试样,标称宽度为b,当20mm≤b≤30mm时,其最大宽度与最小宽度之差不应超过()mm。
A.0.10mmB.0.12mmC.0.15mm