单项选择题

WhichstatementiscorrectinreferencetoIPv6multicast？（）……

Which statement is correct in reference to IPv6 multicast？（）

A.IPv6 multicast uses Multicast Listener Discovery.
B.The first 8 bits of an IPv6 multicast address are always FF （1111 1111）.
C.IPv6 multicast requires MSDP.
D.PIM dense mode is not part of IPv6 multicast.

<上一题目录下一题>

热门试题

单项选择题InFrameRelay，FECNmessagesindicatingcongestionaresentorreceivedbywhichoffollowing？（）

A.Sent by the destination
B.Received by the sender
C.Received by the destination
D.Sent by the sender

单项选择题Priorto802.1w，Ciscoimplementedanumberofproprietaryenhancementsto802.1DtoimproveconvergenceinaLayer2network.Whichstatementiscorrect？（）

A.Only UplinkFast and BackboneFast are specified in 802.1w； PortFast must be manually configured.
B.Only PortFast is specified in 802.1w； UplinkFast and BackboneFast must be manually configured.
C.None of the proprietary Cisco enhancements are specified in 802.1w.
D.PortFast， UplinkFast， and BackboneFast are specified in 802.1w.

单项选择题Auserhasnonetworkconnectivity.Acheckoftheassociatedportindicatesthattheinterfaceisup，thelineprotocolisdown.Whichitemwouldmostlikelycausethisproblem？（）

A.Speed mismatch
B.Incorrect encapsulation
C.MTU set too low
D.Duplex mismatch

单项选择题Youworkasanetworkengineerforthecompany，youwanttoconfiguretwoBGPspeakerstoformanEBGPsessionacrossafirewall.Ontheengineer’snetwork，thefirewallalwayspermitsTCPsessionsthatareinitiatedfromtheinsidenetwork（thenetworkattachedtotheinsideinterfaceofthefirewall）.WhatprerequisiteisthereforenablingBGPtorunonthisnetwork？（）

A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering， with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.

单项选择题MultiProtocolLabelSwitching（MPLS）isadata-carryingmechanismthatbelongstothefamilyofpacket-switchednetworks.ForanMPLSlabel，ifthestackbitissetto1，whichoptionistrue？（）

A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.