A.150m/min B.150r/min C.150mm/min D.150mm/r
单项选择题在刀库中每把刀具在不同的工序中不能重复使用的选刀方式是()
A.顺序选刀 B.任意选刀 C.软件选刀 D.自动选刀
单项选择题分度工作台的定位精度是靠()保证的。
A.驱动装置的运动精度 B.分度定位元件 C.定位检测元件 D.分度装置的运动精度
单项选择题塑料导轨的两摩擦副之一粘贴塑料软带,而另一摩擦副可采用()
A.采用塑料导轨 B.铸铁导轨 C.淬硬钢导轨 D.铍青铜导轨
单项选择题滚动导轨预紧的目的是()
A.提高导轨的强度 B.提高导轨的接触刚度 C.减少牵引力 D.ABC
单项选择题主轴滚动轴承的预紧主要作用是()
A.消除传动间隙 B.减小摩擦阻力 C.提高接触刚度 D.增大摩擦阻力
单项选择题感应同步器滑尺上的正弦绕组和余弦绕组相距()
A.一个节距 B.1/2个节距 C.1/4个节距 D.1/8个节距
单项选择题用闭环系统X、Y两轴联动加工工件的直线面,若两轴均存在跟随误差,假定系统增益相等,则此时工件将()
A.不产生任何误差 B.产生形状误差 C.产生尺寸误差 D.产生位置误差
单项选择题影响闭环伺服系统定位精度的主要因素有()
A.插补误差 B.检测元件的检测精度 C.圆整误差 D.传动件的误差
单项选择题步进电机开环进给系统的进给速度与()
A.指令脉冲频率f有关B.脉冲当量δ有关C.步距角α有关D.ABC均有关
单项选择题在交流电机调速系统中,为使电磁转距M基本保持不变,除调节电源的频率处,同时还应调节定子的()
A.电流 B.电压 C.电阻 D.通电时间
单项选择题直流伺服电机的常用调速方法是()
A.调节电枢电压U B.调节电枢电流I C.调节激磁回路电阻R D.调节频率
单项选择题用于开环伺服系统执行元件一般是()
A.小惯量直流电动机 B.交流异步电动机 C.永磁宽调速直流电动机 D.功率步进电动机
单项选择题脉冲编码盘是一种()
A.增量检测元件 B.角度检测元件 C.模拟检测元件 D.线位移测量元件
单项选择题在光栅位置检测装置中,信息经过辨向细分电路后,其输出信息是()
A.方波 B.三角波 C.脉冲信号 D.锯齿波
单项选择题感应同步器在以鉴相方式工作时,其正弦余弦绕组的激磁电压的特点为()
A.幅值、频率相同相位不同 B.幅值、相位相同频率不同 C.频率、相位相同幅值不同 D.幅值、相位、频率均不同