单项选择题

A.Run cfgdev on the VIO server and re-run the mkvdev co……

Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea .
Which of the following will most likely resolve the problem？（）

A.Run cfgdev on the VIO server and re-run the mkvdev command.
B.Run chdev -a sea_enable=yes on the physical Ethernet adapter.
C.Remove and re-add the virtual Ethernet adapter.
D.Remove the IP address from the physical adapter and re-run the mkvdev command.

<上一题目录下一题>

热门试题

单项选择题A system administrator is deploying a new POWER5 server. The application requires AIX 5L V5.2. Which of the following virtualization technologies can be used？（）

A.DLPAR
B.Micro-Partitioning
C.Virtual Storage
D.Virtual Ethernet

单项选择题WhichofthefollowingshouldbedoneFIRSTwhensettingupanewp5-520tobemanagedbyanewHMCviaaprivatenetwork？（）

A.Change passwords in ASMI
B.Add the managed system to the HMC
C.Connect the p5-520 to a power source
D.Connect the HMC and the p5-520 server’s HMC1 port to the same network

单项选择题Company.com would like to share CPU resources between AIX V5.3 and Linux partitions. Which solution would best satisfy this customer requirement？（）

A.Micro-Partitioning
B.Partition Load Manager
C.eWLM
D.Grid Toolbox

单项选择题AfterrebuildingthelistofvirtualdevicesusedbytheVIOserverusingthe cfgdev command，whichcommandwouldberuntoverifythatanewlyconfiguredvirtualSCSIadapterisavailable？（）

A.lsdev -virtual
B.lsdev -Cs scsi
C.lscfg -vl
D.lsdev -adapter

单项选择题Company.com has recently received a new p5-570 in the data center and intends to Micro-Partition the server. In which order should installation steps be taken？（）

A.Connect to the network,power on the server,Micro-Partition the server
B.Connect to the HMC,power on the server,Micro-Partition the server,connect to the network
C.Power on server,connect to the network,Micro-Partition the server,connect to the HMC
D.Power on the server,connect to the HMC,Micro-Partition the server,connect to the network